System Connection Introduction; Audio Output; Default Output: 2X20Watt@4Ohm; Bridge Connection: 1X40Watt@8Ohm - Leviton 41920-A01 Manual De Instrucciones

Mixing Audio Amplifier
4. System Connection

4.1. Audio Output

4.1.1. Default output: 2x20Watt@4Ohm

The default amplifier output is 2 x 20 watts into a 4 ohm load. The amplifier should be
connected as pictured below:

4.1.2. Bridge connection: 1x40Watt@8Ohm

The amplifier can also be connected in a bridged configuration. This doubles the
output power to 1 x 40 watts into 8 ohms. The inputs are summed to mono so either or
both can be used. The Bridge connection is:
4.1.3. Dual-mono Output 2x20Watt@4Ohm
The amplifier can also be connected in a double-mono configuration. It sums the left
and right channel to generate a mono audio output. The Mono connection is:
www.leviton.com
MONO
STEREO BRIDGE
Connecting the four pins, like this
MONO
STEREO BRIDGE
Connecting the two pins, like this
MONO
STEREO BRIDGE
Connecting the four pins, like this
4
DI-040-41920-25A