To Use - The First Years Quiet Expressions Y6228 Manual De Instrucciones

Double Electric Breast Pump
Assembly (continued)
6. Attach one single hose end to each of
the 3-way adapter baffles.
OR
8. Plug AC adapter into side of pump
as shown. Plug AC adapter into
outlet. For Battery operation, insert
batteries into pump (see "Install/
Change Batteries" page 15).
10 thefirstyears.com
7. When using handle for double pump,
push bottle with 3-way adapter into
opening of handle as shown until you
hear two clicks.
Single Pumping
Note: If using a single pump, attach
one single hose end into one of the
3-way adapter baffles. Take the other
hose and cover the hose end with the
single pump stopper.
To Use: Always Wash Your Hands Before Pumping
1. To start milk flow: express a few drops of milk by hand.
2. Turn pump on by pressing and holding power button.
Note: The pump always powers on at level one.
3. To pump: Sit upright. Grasp the bottle by the 3-way
adapter and insert breast into the Flexi-Fit ™
breast should completely fill the shield but the shield does
not need to completely fit around your breast.
4. To increase suction: press the "+" button. There are eight
suction levels. The blue suction indicator lights illuminate
as suction is increased. When the last light is illuminated,
the highest suction setting has been reached.
5. To reduce suction: press the "–" button.
Note: If using as a single pump, ensure single pump stopper is pushed into unused
hose end. If not properly secured, you may notice a reduction in suction.
To immediately reduce suction, turn pump off and remove shield from breast
CAUTION: Do not fill past the 4 oz or 8 oz marking on the bottle. Pumping into an
overfilled bottle could damage the pump. If you wish to continue pumping, remove full
bottle and replace it with an empty bottle.
shield. Your
Note: Your nipple should be
centered and free standing,
not touching the sides of the
shield as shown. Improper
positioning can cause
irritation and pain.
thefirstyears.com 11