English; Charging On The Docking Station; Charging Automatically During Use; Charging Directly From The Mains - Philips FC8710 Manual De Instrucciones

ENGLISH

8
Preparing for use
Installing the docking station
1 Insert the small plug of the adapter into the socket on the docking station (1) and insert the
adapter into the wall socket (2). The display of the docking station lights up (Fig. 13).
2 Place the docking station on a horizontal, level floor against the wall (Fig. 14).
Note: Make sure that there are no obstacles or height differences 80cm in front, 30 cm to the right and
100 cm to the left of the docking station.
Charging
When charging for the first time and when the rechargeable battery of the robot is empty,
the charging time is four hours.
Your robot can be charged in two ways:
- On the docking station, either manually or automatically during use;
- By connecting the robot directly to the mains
Note: When the rechargeable battery is fully charged, your robot can clean for up to 100 minutes.

Charging on the docking station

1 Place the robot on the plugged-in docking station (Fig. 15).
2 Press the power switch to switch on the robot (Fig. 16).
3 The on/off indicator on the display starts flashing (Fig. 17).
4 When the rechargeable battery is fully charged, the on/off indicator on the display stops
flashing (Fig. 18).

Charging automatically during use

1 When the robot has finished cleaning or when only 15% of the battery power remains,
it automatically returns to the docking station to recharge. When the robot returns to the
docking station, the on/off indicator flashes quickly (Fig. 19).
2 When the rechargeable battery is fully charged, the battery indicator on the display of the
robot stops flashing.
Note: The robot only returns to the docking station automatically when it started cleaning from the
docking station.

Charging directly from the mains

1 Insert the small plug of the adapter into the socket on the robot (1). Insert the adapter into a
wall socket (2) (Fig. 20).
2 Press the power switch to switch on the robot.
3 When the robot is connected to the mains correctly, the lon/off indicator starts flashing.
This indicates that the robot is charging.
4 When the rechargeable battery is fully charged, the on/off indicator of the robot stops
flashing.
Preparing the room for a cleaning run
- Before you start the robot on its cleaning run, make sure that you remove all loose and fragile
objects from the floor (Fig. 21).