Haier HBB 177 TNF Manual De Instrucciones página 21

Tabla de contenido

Publicidad

switch on your appliance, the symbol illumined and power is connected again.
10.
On the no frost models, there is a function: compulsive defrosting. Press the buttons
+
for 5 seconds to switch on the compulsive defrosting function to clean the freezer
evaporator and digitals of freezer temperature shine. Press the button
+
3 seconds to
switch off the compulsive defrosting function , and the digitals of freezer temperature eliminate.
10 Fault display
This appliance has 'fault display & alarm' function. Once the sensors got fault, there are alarms
displayed on the temperature displaying, the appliance still cools but professional service engineer
should be called and check the appliance.
F1 – Sensor of fridge
evaporator
F2 – Sensor of adapt zone
F3 – Sensor of fridge apartment
F4 – Sensor of freezer
compartment
F5 – Sensor of defrosting
2E – Fault of fan/motor in freezer
CE– Communication fault between main panel and display panel.
The above Errors only show on display, no voice
Over temperature alarm in freezer: after freezer temperature arrives at the set
temperature, after that, if the temperature rises to >-1 °C, the alarm will start,
accompany with flash of freezer temperature digit. Press any button to cancel
the voice alarm. The flash will remain until the temperature is <-1 °C.
PS: Main board locates in compressor compartment
20

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido