Installing The Battery; Charging The Battery - QIMMIQ CRUSOE RP 241 Manual Del Usuario

3. Installing the battery

This mobile phone is suitable for the original accessories
and battery. Install the battery by sliding it into the batte-
ry compartment with the contacts facing downwards to
the right, in order to prevent the battery contact surface
from being damaged. Then, replace the back cover.

4. Charging the battery

To charge the battery, connect the adaptor end that has the
micro-USB socket to the phone charging port, and the other
end to a wall socket. The
battery is fully charged. You can then disconnect the charger
from the phone and from the wall socket.
WARNING: When a travel charger and its accessories are
used to charge the battery, please firstly check if they are
original or recognized by the original manufacturer. The use of
other accessories may damage your mobile phone and cause
risks. Always use them indoors and in dry places.
Avoid discarding the battery by burning as this can cause a
fire. Damaged batteries can cause an explosion. Refer to the
detailed safety instructions concerning the precautions for use
of the battery.
42
icon is displayed once the