Electrolux EXI09HD1W Manual De Instrucciones página 8

Press this button to turn the air conditioner
ON or OFF.
By pressing this button, AUTO, DEHUMIDIFY,
FAN, COOL, and HEAT (COOL only model
has no HEAT feature) mode can be selected
progressively.
AUTO mode is default while power on.
Under AUTO mode, the initial value would not be
displayed, and it will run in the desirable Tem.
Under HEAT mode, the initial value is 28°C;
Under other modes, the initial value is 25°C.
AUTO DEHUMIDIFY
Press this button to switch the indicating lights
of the indoor unit ON or OFF.
The normal condition at start up is ON.
By pressing this button, Auto, Low, Medium and
High speed can be progressively selected.
When the unit is turned on, Auto fan speed is
the default.
Low speed.
8
FAN COOL HEAT
Press this button in COOL or HEAT mode to put
the fan into the high speed Turbo mode and the air
conditoner will work at maximum power.
Press again to cancel this function.
Press the X-Fan button to active the
Self-Cleaning. After the unit is turned off the indoor
fan will continue operation for 10 minutes to dry
the indoor unit prevent from bacteria and mildew
growing.
Press this button to set the start time.
Press this button to set the stop time.
Press this button, the louver will swing up and
down automatically. Press again to cancel it and
the louver will stay at its last position.
Press this button, the remote control will send the
temperature information to the indoor unit every
10 minutes. The unit will operate to reach the set
temperature at the location of remote control.
Presss again to cancel this function.
Forward Backward
Press the button to increase the temperature
setting.
Press the button to decrease the temperature
setting.
In Timer On/Off or Clock functions, use these
buttons to set the clock or timer adjustment.
Press this button and the Clock symbol
blink. You can press Control buttons
set the time you want.
Press this button to change the indoor unit
display of the set temperature to the room
temperature.
Press this button to start the Eco operation.
This is ideal for the users to use while sleeping.
Press again to cancel the function.
Under heating mode, press Temp and Clock
buttons to turn on the function of heating the
indoor room temperature to 8°C.
will
and to