Setting The Channel - lidl Z31915-US Instrucciones De Utilización Y De Seguridad

If you want your weather station to announce the absolute air pressure:
Press and hold the HISTORY ABS / REL button for 3 seconds. Then press the
+ or – button to change to the absolute air pressure. Confirm by pressing the
HISTORY ABS / REL button.

Setting the channel

The weather station automatically receives the outdoor sensor signal once you have
completed all the settings.
Note: In the event of interference from nearby equipment transmitting radio signals,
both the humidity (outdoor)
select a different channel for the outdoor sensor by pressing the CH button
the weather station or the channel selector switch
relevant data is shown in the LC display.
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
- : automatic channel change
36 US-EN
282650_aur_Funk-Wetterstation_Content_US.indd 36
and outdoor temperature
22
symbols will flash. Please
25
on the outdoor sensor. The
44
on
37
14.02.17 14:19