Installation: Straight Housing Option - Whale Twist DS0001B Manual Del Usuario

4 STRAIGHT HOUSING MODELS
PARTS LIST –
STRAIGHT HOUSING MODELS
MIXER VERSION
1 Handset and hose with p clamp
(screw attached)
1 Straight housing
1 Locking nut
1 Valve housing (includes 2 retaining screws)
Includes temporary shut off valve attached
2 WX1532B - adaptor
with retail models only, available separately
for bulk models)
COLD ONLY VERSION
1 Handset and hose with p clamp
(screw attached)
1 Straight housing
1 Locking nut
1 WX1532B - adaptor
5 STRAIGHT HOUSING
INSTALLATION
STEP 1.
Choose a suitable location for the shower to be
installed. The unique design allows the shower
to be fitted on a flat or curved surface, on a
horizontal or angled plane. Ensure there is
sufficient space to allow space for the handset
and hose when stowed. (See Fig. 2). Ensure
that the plumbing connections and p clamp are
mounted as close as possible to the handset
housing to ensure maximum usable hose length.
Please note: Before installing, ensure that sufficient space
is allowed for the shower hose when stowed. Also ensure
that it is free from obstructions when pulled out.
1 / " BSP female (supplied
2
1 / " BSP female
2
Fig 1
Deck Protect TM
End cap
Handset
Hose
Valve
housing
Fig 2
Recommended
minimum depth
allowance
100mm (4")
Ø 57 mm
(2 1 /
Water Level
To valve housing
Outside boat
Please allow a minimum width of
250 mm (10") for hose stowage
P clamp
Straight
housing
")
2
Recommended
minimum height
allowance
400mm (15 3 / ")
4
Inside boat
EN
7