Characteristics And Operation - Quick RRC PW4 Manual De Instalacion Y Uso

CHARACTERISTICS AND OPERATION

EN
RRC THRUSTER POCKET RADIO TRANSMITTER
The RRC Thruster pocket transmitter is a device which combined with a RRC radio receiver is used to control Quick thrusters
installed on recreational crafts.
The RRC radio system for thrusters must be used as a supplement to the Quick wired thruster control system already installed
on the boat.
Take necessary steps in order to avoid that malfunctioning of the RRC Thruster radio control system may cause damage
to people, animals or property.
The advantages offered by the RRC Thruster pocket radio transmitter are:
• Microcontroller-operated functions.
• Operating temperatures from -15°C to +70°C.
• FSK modulation and carrier frequency 434.420 Mhz.
• LED indication of operational status, low battery and transmission feedback.
• Floating.
INSTALLATION
BEFORE USING THE RADIO TRANSMITTER, CAREFULLY READ THIS USER MANUAL. IN CASE OF
DOUBTS PLEASE CONTACT THE RETAILER OR QUICK
F
In case of discordance or errors in translation between the translated version and the original text in the Italian language,
reference will be made to the Italian or English text.
F
This device was designed and constructed for use on recreational crafts.
Other forms of use are not permitted without written authorization from the company Quick
The RRC Thruster pocket radio transmitter has been designed and manufactured for the purposes described in this user
manual. Quick is not liable for direct or indirect damages caused by an improper use of the radio control, due to an incorrect
®
installation or errors possibly present in this manual.
THE PACKAGE CONTAINS: pocket radio transmitter with battery included - lanyard - conditions of warranty - the present
manual of installation and use.
Pocket transmitter
WARNING: the transmitter needs to be programmed in the receiver's memory. To do this, follow the procedure shown in
the reveiver's user manual.
Power supply
The pocket transmitter is powered using a lithium CR2450 battery. To replace it, see the BATTERY REPLACEMENT paragraph.
Enabling
The RRC Thruster pocket transmitter is enabled by keeping both
keys pressed for the PT4 model.
Once they have been pressed, the orange transmission LED first starts flashing at regular intervals and then starts
flashing more quickly. After they have been released, the transmission LED will communicate through brief flashes that
enabling has taken place.
Operational status
When any of the transmitter keys is pressed, the green transmission LED flashes quickly to signal that transmission has taken
place. Each key pressed corresponds to the activation of a relay (or 2 relays) on the receiver, which will stay active as long as
the key isn't released.
8
model PW4
CUSTOMER SERVICE.
®
Transmission LED
1
3
model PT4
keys pressed for the PW4 model and 1
.
®
2
4
2
RRC PW4-PT4 - REV003A