Descargar Imprimir esta página

Diono flexa Instrucciones página 15

Ocultar thumbs Ver también para flexa:

Publicidad

DISPOSAL
In order to protect the environment, remember to properly dispose of your product. When you stop using your product, please
make sure you dispose of the product in accordance to your local waste management regulations for correct disposal.
WARNING! NEVER LEAVE THE CHILD UNATTENDED. ALWAYS USE THE
RESTRAINT SYSTEM. DO NOT ADD A MATTRESS TO THIS PRODUCT. THIS
PUSHCHAIR IS SUITABLE FOR CHILDREN FROM BIRTH TO 22 KG.
WITH FURNITURE AND FURNISHINGS (FIRE) (SAFETY) REGULATIONS 1988.
IMPORTED BY: DIONO UK, 2ND FLOOR, DALE HOUSE, 35 DALE STREET,
28
flexa
CARELESSNESS CAUSES FIRE
- TESTED TO ENSURE COMPLIANCE
MANCHESTER, M1 2HF, UNITED KINGDOM - UK.DIONO.COM
CONFORMS TO BS EN 1888:2018
4
MAINTENANCE
Your Diono pushchair requires regular inspection and maintenance.
Regularly inspect the locking devices, parking devices, harness assembly, seat unit and all fi ttings to ensure they are secure
and in full working order.
Should any part of your Diono pushchair become stiff or diffi cult to operate, fi rst ensure that dirt is not the cause. Then try a
light application of a sprayable lubricant e.g. Silicone spray, ensuring that the lubricant penetrates between the components,
but take care as excessive application may encourage the accumulation of dirt. Regular light lubrication of moving parts will
extend the life of your pushchair and make opening and folding easier.
Do not leave the Diono pushchair in sunlight for prolonged periods as the color of some fabrics may fade.
Store the pushchair in a dry, well ventilated and safe place.
CARE
Your Diono pushchair hood, seat, seat pads and safety harness can be spot cleaned by sponging lightly with warm water
and a mild detergent.
Plastic and metal parts of the pushchair may be sponged clean with warm water and a mild detergent before drying with a
soft, lint free absorbent cloth.
Never clean with abrasives, ammonia or bleach based and spirit-type cleaners.
Allow all parts to dry thoroughly before storing.
After exposure to wet or damp conditions, leave the pushchair fully opened in a warm, well ventilated environment. Dry it
with a soft, lint free and absorbent cloth.
Residual moisture, if left unattended, will encourage mildew or rust to form, damaging the pushchair.
5
diono.com
29

Publicidad

loading