jWIN JV-DTV17 Manual Del Usuario página 17

Memorizing the Channels with Auto programe
- For Auto to work, the programming source must be con-
nected to the TV and the TV must be receiving program-
ming signals either over-the-air or from a cable-type ser-
vice provider.
1. Repeatedly press the MENU button to select the
Station menu.
2. Press the D D E E button to select
/
3. Press the G G button to begin the channel search.
• Wait for auto program to complete the channel
search cycle before choosing a channel. The TV
scans for over-the-air channels and then channels
provided by a cable service.
NOTES
• When the channel search is complete, use the
tons to review the memorized channels.
• If you press the OK button in Auto, the function will stop
and only channels programming up to that time will
remain.
• Auto function can memorize only the channels which are
being received at that time.
AutoOprogram
ManualOprogram
FavoriteOch.
()MoveO}{NEXTOMENU
Add/Delete Channels with Manual program
- You can manually include or erase individual channels.
1. Repeatedly press the MENU button to select the
Station menu.
2. Press the
Auto program .
3. Press the
add to memory or erase.
4. Press the
Erase
5. Press the
Select the desired programme number (0 to 99) with
the F F
under 10 is entered with a numeric '
' 05 ' for 5.
D D / E E but-
6. Press the EXIT button to save and return to TV view-
ing.
The current channel is added to Memory or Erased from
the channel list.
The display
AutoOprogram
ManualOprogram
FavoriteOch.
Auto Oprogram }{
()MoveO}{NEXTOMENU
button to select Manual program.
D D / E E
D D / E E button to select a channel you want to
F F / G G button to select Memory
(delete).
button to select Channel
D D / E E
/ G G button or NUMBER buttons. Any number
0 ' in front of it, i.e.
Stored will appear.
Memory/Erase Memory
Channel
Fine
()MoveO}{Adjust
(add) or
.
6
0O0
EN
17