Set Up: Pc / Mac - Afterglow Fener Manual Del Usuario

set uP: Playstation
1. Plug the Wireless usB transmitter into an active usB port on your Playstation
2. Plug one end of the included optical cable into the optical audio port on the usB
transmitter, and the other end in the optical audio port on the Playstation
3. Press and hold the on/oFF button on your headset to power it on. the alternating leD
colors of the ear cup will indicate the headset is searching for your usB transmitter. When
the headset ear cup and usB transmitter leD turns a solid color, your headset and
transmitter are paired and communicating properly.
4. For use with analog sources, plug one end of the included 3.5mm into the analog audio port
in the transmitter, and the other end into your tV, cable box or MP3 player.
5. Make sure your headset is recognized by your Playstation
sound settings.
6. Adjust the microphone levels in the console's sound menu.
3 english
®
3 console.
®
3 console.
®
® 3 by checking your console's

set uP: Pc / Mac

1. Plug the wireless usB transmitter into an active usB port on your Pc.
2. Plug one end of the grey 3.5mm cable into an aux port in your Pc, and the other end into
the 3.5mm analog port in your usB transmitter.
*if your Pc has an optical output, you may connect your usB transmitter using the included
optical cable instead of the 3.5mm cable.
3. Press and hold the on/oFF button on your headset to power on. the alternating leD colors
on the ear cup indicate the headset is searching for your usB transmitter. When the ear cup
and transmitter leD turns a solid blue, your headset and transmitter are communicating.
** An alternative connection with your Pc is putting the headset into mobile mode. Follow the
mobile connection steps for this set up. note: Microphone function will be supported on Pcs
with a single headset jack for audio and microphone. if you have separate inputs for audio and
microphone on your Pc, you will need to connect through an apapter. (sold on online retailers)
4. Make sure the Afterglow Wireless headset is chosen as an audio output device on your Pc:
right click the small speaker icon in the bottom tool bar > select "Volume options" > select
Afterglow Wireless headset under "sound Devices". You can further adjust the volume on
your headset through your Pc through your audio settings indicated by a small speaker.
english