Installing & Replacing The Battery; Getting Started - Braun DigiFrame 1220 Manual Del Usuario

2. Installing & Replacing the Battery
Place the remote control upside down, press down on the ridged area of the
battery cover and pull towards you to remove the tray. Place one CR2025 lithium
button-cell battery on the tray with the positive "+" side facing you. Reinsert the
tray.
3.

Getting Started

3.1. Put the digital photo frame with installing bracket on a flat position steadily,
then plug one end of the AC adapter into a standard 110-240V AC electrical
outlet and the other end into the DC IN slot on the left side of the frame.
3.2. Slowly remove the protective film covering on the screen.
3.3. Remove the plastic battery insulator from the battery compartment and
make sure the remote control has a battery inside. Please refer to "Installing
& Replacing Battery" if you need a new battery.
3.4. It will start up automatically when the power is on. Press the power button
on the backboard or press the Power Button on the Remote Control to
Switch On/Off.
BRAUN-DigiFrame1220-Manual-140x210mm-Vector.indd 26
6
16.03.2017 13:16:44