Indel B CRUISE 49 Instrucciones Para El Uso página 19

M A I NTE N A N C E
WARNING
Before every maintenance operation, disconnect the power supply from the main connector.
Since the evaporator operates at temperatures well below freezing, ice and frost will inevitably
form upon it.
The humidity in the air, the temperature and the number of times the door is opened will have
a significant impact on frost formation.
The refrigerator should always be defrosted when the layer of frost on the evaporator reaches
a thickness of 3-4 mm or more.
Turn off the refrigerator by turning the thermostat to its 0 position.
Defrosting should be performed when the products can remain as cool as possible outside of
the refrigerator itself. Do not use sharp objects to remove ice and frost from the evaporator, as
this could damage it and result in leaks.
Only turn the refrigerator back on once it has been defrosted, cleaned and thoroughly dried.
Remove, empty and dry the drip tray beneath the evaporator. A towel can be placed at the base
of the refrigerator during the defrosting procedure in order to facilitate water collection.
U S E FU L A DVI C E S
If the refrigerator does not work, or if it works wrongly, before referring to our after sales service,
make sure that:
a) power is not missing,
b) the voltage which reaches the main connector is equal to the one shown on the label,
c) the connections are correctly made,
d) the ventilation grids are not obstructed,
e) the refrigerating unit is not near a source of heat,
f) the fuse mounted on the power line is not blown.
WARNING
The power cable must be replaced only by qualified technical personnel and, in any case, by a
service authorized by the manufacturer.
Indel B disclaims any responsibility if the above instructions and conditions are not followed
or not met.
17