Optional Accessories - Makita DF001D Manual De Instrucciones

NOTICE:
Change the direction only after the tool
comes to a complete stop. Changing the direction
of rotation before the tool stops may damage the tool.
Lighting up the front lamp
CAUTION:
Do not look in the light or see the
source of light directly.
► Fig.4
To turn on the light, press the lamp switch. To turn off
the light, press the lamp switch again.
ASSEMBLY
Installing or removing driver bit
► Fig.5
To install a driver bit, push it firmly into the driver bit
holder. To remove the driver bit, pull it out of the driver
bit holder.
OPERATION
CAUTION:
When bending the tool to use in
the pistol shape or straightening to use in the
straight shape, do not hold the bendable part of
the tool. Failure to do so may cause your hand and
fingers to be pinched and injured by this part.
► Fig.6
The tool can be used in two ways; a straight shape and
a pistol shape which are selectable according to the
conditions of workplace and screwdriving.
Screwdriving operation
► Fig.7
Place the point of the driver bit in the screw head and
apply pressure to the tool. Then switch the tool on.
When the screw head and surface of the workpiece
becomes flat, release the switch.
NOTICE:
Make sure that the driver bit is inserted
straight in the screw head, or the screw and/or bit
may be damaged.
NOTE: When driving wood screw, predrill a pilot hole
2/3 the diameter of the screw. It makes driving easier
and prevents splitting of the workpiece.
Using the tool as a hand screwdriver
► Fig.8
Switch off the tool, and then turn the tool.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off before attempting to perform inspec-
tion or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Disposing of tool
A Li-ion battery is built into this tool. When disposing
of the tool, be sure to bring it to Makita Authorized or
Factory Service Centers to recycle the built-in battery.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Driver bits
• Socket bits
• AC adapter and USB cable
• Plastic carrying case
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
6 ENGLISH