Operation Modes - Klarstein Clover Guia De Inicio Rapido

OPERATION
1 Insert the adapter into the adapter port and plug it into the electrical outlet. Open
the front cover, then use your index finger and thumb to hold the watch pillow from
the two sides of the pillow hitch marked with two arrows. With some force, pull out
the watch pillow.
2 Place the watch on the pillow by pushing in the spring on the back of the pillow,
then put your watch around the pillow and let go of the spring.
3 Once the watch is on the pillow, place the pillow back into the winder. Push until
you hear a click signifying that it is securely in the winder.
4 Use Power switch to select winder rotating direction or turn off the unit. Select one of
the modes by setting the left switch to A, B, C, or D.
5 If you want to turn off the watch winder, set the power switch to OFF.

OPERATION MODES

Mode A 650 turns per day
Mode B 900 turns per day
Mode C 1200 turns per day
Mode D 1500 turns per day
The watch winder rotates for 7 minutes and
rests for 104 minutes, before the run starts
again.
The watch winder rotates for 7 minutes and
rests for 73 minutes, before the run starts
again.
The watch winder rotates for 7 minutes and
rests for 53 minutes, before the run starts
again.
The watch winder rotates for 7 minutes and
rests for 41 minutes, before the run starts
again.
EN
9