Inserting The Battery Pack - Sony Cyber-shot DSC-T2 Manual De Instrucciones

2 Inserting the battery pack

Battery/"Memory Stick Duo"
cover
Open
1
Open the battery/"Memory Stick Duo" cover.
2
Insert the battery pack.
3
Close the battery/"Memory Stick Duo" cover.
[ To check the remaining battery charge
Press POWER button to turn on and check the remaining battery charge on the LCD screen.
Remaining
charge
indicator
Status
• If the NP-FD1 battery pack (not supplied) is used, the minute display (
the battery remaining indicator.
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct depending on conditions of use and circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page 14).
12
Close
Sufficient Battery
power almost fully
remaining charged
Align the v mark of the battery slot with the v
mark on the side of the battery pack. Press and
hold the battery eject lever and insert the
battery pack.
Battery half Battery low,
full recording/
playback
will stop
soon.
Battery eject
lever
Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
60 Min) is also shown after