Initial Operation; Customer Service - Medion E89194 Manual Del Usuario

• After transporting the device,
wait until it has reached room
temperature before switching it on.
Major fl uctuations in temperature or
humidity can lead to condensation
which could cause an electrical
short-circuit. Put the connector cap
on before transporting the device.
Electromagnetic
compatibility
You must comply with the European
directives on electromagnetic
compatibility (EMC) when making
connections. Maintain a distance of at
least one metre from high-frequency
and magnetic sources of interference
(TV sets, speakers, mobile phones, etc.)
in order to avoid malfunctions and data
loss.
AFTER SALES SUPPORT +1 866 633 4660
USA

Initial operation

Connecting the USB stick
Remove the protective cap from the USB
stick and insert the device into a free
USB port.
The USB stick will be recognised and the
operating system allocates a free drive
letter. You may now use the device as
though it were a drive (copy or delete
data, etc.).
Removing the USB stick
− Depending on the operating system,
it may be necessary to log out the
device.
− The installed USB stick is displayed
in the task bar. Left-click on the icon
"Safely Remove Hardware". Left-click
on the corresponding entry.
You will now be notified that you may
remove the device.
us.info@medion.com MODEL: MD 87191 PRODUCT CODE: 93604

Customer service

Troubleshooting
The USB stick is not recognised:
• Is the device connected correctly?
• Open the Windows
to see if the USB devices have been
correctly connected. If necessary,
re-install the USB controller.
Data cannot be read/written:
• Did you format the USB stick with a
different computer? Different formats
(FAT/NTFS) may be incompatible.
Save the data and format the USB
stick again using a compatible
format.
Please note:
If, as a result of an unforeseeable
combination of operating steps, faulty
data transfer or electrostatic discharge,
the USB stick can no longer be operated,
remove the USB stick correctly and then
put it back into operation.
06/2016 AFTER SALES SUPPORT +1 866 633 4660
USA
Do you need more help?
If the above suggestions did not solve
your problem please contact us. The
following information would help us:
• How is your computer confi gured?
• What peripheral devices do you use?
® device manager
• What messages appear on the
screen?
• What software were you using when
the problem occurred?
• What steps have you already taken to
try and rectify the problem?
• Please provide your customer
number if you have one.
Cleaning
It is usually not necessary to clean the
device.
• This device does not contain any
parts which need to be serviced or
cleaned.
• Be sure to keep the USB stick clean.
Do not use solvents, corrosive or
aerosol detergents to clean the
device. If necessary, the casing can
be wiped down with a damp cloth.
us.info@medion.com MODEL: MD 87191 PRODUCT CODE: 93604 06/2016