Technical Data - JARDIN y NATURA natflow DP5300 Manual De Instrucciones

WARRANTY
Our products are designed for domestic use.
The warranty covers the product against defects in workmanship for up to two
years after the date of purchase.
The warranty does not cover:
· The wear of the parts due to excessive dirt in the water.
· The electric failures caused by premature wear of the mechanical seal due to dirt
or running the pump dry.
Causes that invalidate the 2 year warranty:
· Cut or manipulating the power cord.
· Manipulating the pump without the authorization of the Jardín y Natura staff.
· The pump running dry.
· The working water is either too salty or with high mineral content.
· That the pump has worked with sewage water.
· Lack of maintenance.
· The loss of the invoice or receipt of purchase.
· The inappropriate or different use that indicated in the instructions.
· The industrial and/or professional use of the product.
!
Jardín y Natura is not liable for damage to persons or property due to improper
installation of its products. If this installation is considered of vital importance it will
have to be doubled as a security measure.
DECLARATION OF CONFORMITY CE
Jardín y Natura Outdoor & Garden Products S.L. declares that the pumps DP5300,
DP5240, DP5162, DP5132 and DP5092 have been designed in accordance with
the directives 2006/95/EC (standards EN60335-1, EN60335-2-41 and EN50366) and
2004/108/EC (standards EN61000-3-2, EN61000-3-3, EN55014-1 and EN55014-2).
Barcelona, November 2013
TROUBLESHOOTING
but doesn't pump water
insufficient flow
The pump starts
motor overheating
motor make noise and tries to start
Pump doesn't start
motor doesn't make any noise
> For another type of incidents, please contact our technical service (+34 93 114 51 68 // spv@jardinynatura.es // www.jardinynatura.es).

TECHNICAL DATA

DP5092
220-240V~ 50 Hz
Mains voltage/frequency
Motor power input
Pump power output
Maximum flow rate 5900 l/h
Maximum delivery head
Max immersion depth
Hose connection
Max diameter of impurities 0.5 mm
Power cable 20m H07RNF
C. Marquez
Administrator
High delivery head.
Mains voltage too low.
The filter screen is blocked.
Motor runs in the wrong direction.
Defected motor shaft.
The impellers need replacement.
High level of dirt/sludge.
Mains voltage too low.
The motor bearings need replacement.
Too high flow rate.
The impellers are blocked.
Burned capacitor.
Defected cable/circuit breaker/plug.
Burned winding.
DP513 2 DP5162
220-240V~50 Hz 220-240V~50 Hz
900 W 1300 W 1600 W
550 W 750 W 1100 W
6000 l/h 6000 l/h
57 m 72 m
30 m 30 m
1 ¼"
1 ¼"
0.5 mm 0.5 mm
20m H07RNF 20m H07RNF
DP5240 DP5300
220-240V~50 Hz 220-240V~50 Hz
2400 W 3300 W
1500 W 2200 W
6000 l/h 6300 l/h
101 m 144 m
30 m 30 m
1 ¼" 1 ¼"
0.5 mm 0.5 mm
20m H07RNF 20m H07RNF
flow
nat
Well Pump
DP5300
DP5240
DP5162
DP5132
DP5092
v6.m
Lower the delivery head.
Check mains voltage.
Clean screen with water jet.
Contact our technical service.
Contact our technical service.
Contact our technical service.
Contact our technical service.
Check mains voltage.
Contact our technical service.
Increase the delivery head.
Contact our technical service.
Replace it with a capacitor of the same capacitance.
Contact our technical service.
Contact our technical service.
DP5300
191 m = 1000 l/h
180 m = 2000 l/h
127 m = 4000 l/h
(m) 84 m = 5000 l/h
200
150
100
80
201 m
30 m
60
1 ¼"
40
20
1 2
EN
DP5240 DP5162
137 m = 1000 l/h 96 m = 1000 l/h
128 m = 2000 l/h 90 m = 2000 l/h
91 m = 4000 l/h 79 m = 3000 l/h
62 m = 5000 l/h 64 m = 4000 l/h
DP5132
68 m = 1000 l/h
56 m = 3000 l/h
45 m = 4000 l/h
31 m = 5000 l /h
DP5092
54 m = 1000 l/h
50 m = 2000 l/h
45 m = 3000 l/h
25 m = 5000 l/h
3 4 5