— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4
Securely tighten the screw, and then check
that the fabric is taut.
• Using the included screwdriver (large),
firmly tighten the screw.
1 Screwdriver (large)
Attaching the embroidery
frame
After hooping the item in the compact frame, attach
the frame to the embroidery machine.
Note
● When attaching or removing the compact
frame, make sure that the start/stop button
of the embroidery machine is lit in red. If
the start/stop button is flashing in green,
the embroidery machine may start sewing.
If the embroidery machine accidentally
starts operating, injuries may result.
● Before attaching the compact frame,
install embroidery frame holder E on the
embroidery machine.
1
Loosen and remove the two thumb screws
on the embroidery machine, and then
remove the embroidery frame holder from
the carriage.
1 Thumb screws
• The removed thumb screws will be used to
install embroidery frame holder E.
2
Insert the pins on the frame-mounting plate
of the carriage into the holes on both sides of
the mounting plate of embroidery frame
holder E.
1
1 Pins on the frame-mounting plate of the
2 Holes in the mounting plate of embroidery
3
Install and tighten the two thumb screws
removed in step
● Please firmly tighten the two thumb screws
2/3
a
b
carriage
frame holder E
1
.
Note
with the disc-shaped screwdriver included
with the embroidery machine. The wrong
frame size may be indicated on the
machine's screen if the two screws are not
tightened.