Publicidad
Idiomas disponibles
Idiomas disponibles
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
About the Clamp Frame
This frame will be used for embroidering specially
shaped items that cannot be held in a traditional
frame, such as shoes and gloves.
Verifying the package
contents
Check that the following parts are included. The
package contents differ depending on the clamp
frame kit that you have purchased. If any item is
missing or damaged, contact your authorized sales
representative.
● This Installation Manual is included with
both kits.
● The maximum embroidery area of the
clamp frame is 24 mm × 45 mm (7/8 inch
× 1 3/4 inches)
■ Contents of clamp frame Kit 1
1.
Embroidery frame holder D
1
Clamp frame S
2
Installation Manual
3
* Install embroidery frame holder D in order to
attach the clamp frame.
■ Contents of clamp frame Kit 2
Used to embroider shoes when size is greater
than 27 cm (US9/UK8/EUR42).
1.
Clamp frame SR
1
Clamp frame SL
2
Installation Manual
3
* Embroidery frame holder D (included in clamp
frame Kit 1) is necessary for attaching the clamp
frames.
Note
2.
2.
Items that can be
embroidered
When using the clamp frame, a wide variety of
items can be embroidered, except extremely hard
or thick materials.
● When embroidering thin materials, be
● Shoes with the size less than 23 cm (US5/
● The maximum embroidery area may be
■ Sample projects
Shoes (front)
3.
Gloves (strap)
3.
1/5
Note
sure to use a stabilizing product.
UK4/EUR37) cannot be embroidered.
smaller than 24 mm × 45 mm (7/8 inch ×
1 3/4 inches) depending on the size,
depth, shape or the kind of item you are
embroidering.
Shoes (side)
Small bag
Shoes (tongue)
Publicidad
