Publicidad
battery level indicators will blink three times when
the password is successfully reset. A new password
must be set in the Ronin app). Press and hold for 10
seconds to force shutdown.
7. Cold Shoe
For connecting to the gimbal or camera.
Installation and Connection
There are three ways to use RavenEye.
Method 1: use RavenEye with DJI RS 2 or RSC 2 (DJI RS 2 is used as an example below)
1. Attach the image transmitter to the gimbal via the cold shoe. Adjust the antennas as shown and keep them
away from motor.
2. Connect the HDMI
TM
port of the image transmitter to the HDMI port of the camera using the provided HDMI
cable according to the camera model.
3. Connect the power/communication port of the image transmitter to the image transmission port of the gimbal
using the provided USB-C to USB-C cable.
If the cold shoe of the gimbal is not available, you can attach the cold shoe to 1/4" screw adapter with
the image transmitter and use with a device that has a 1/4" screw hole.
4. Connect the shutter control port of the camera to the RSS camera control port of the gimbal.
8. Power/Communication Port (USB-C)
For charging and communicating with DJI RS 2 and
RSC 2.
9. Reserved LED
Reserved LED currently without a function.
HDMI
3
Publicidad
