DJI FOCUS Handwheel 2 Guia Del Usuario página 5

The DJI Focus Handwheel 2 is compatible with the Inspire 2 only. The Inspire 1 series
is not supported.
Mounting on Osmo Pro/RAW
1. Attach the Focus Handwheel 2 to the Osmo Pro/RAW as shown then tighten the screw.
2. Connect the Communication Port on the Focus Handwheel 2 to the Osmo Pro/RAW for
power supply and communication using the dedicated Focus Handwheel 2-Osmo Pro/
RAW communication cable (not included, visit the official DJI online store for more
information). Ensure the cable's orientation is correct before plugging into the ports.
Mounting on other Devices
The Rosette Mount on the DJI Handwheel 2 provides
two mounting dimensions: 1/4" and 3/8". If mounting the
Handwheel 2 on other devices with 3/8" port, remove the
screw in the Rosette Mount as shown.
6