Publicidad
Idiomas disponibles
Idiomas disponibles
STAND ALONE CASTORS FOR THERMAL RADIATORS
Thanks for buying this set of standalone castors, compatible with most of the thermal aluminum radiators in the
market.
INSTALLATIONS INSTRUCTIONS
1.-Be sure that the thermal radiator is switched off from the electric current. Carefully, turn up side down the
radiator to reach lower side.
2.-Put the castors in the stand using the nuts included in the package.
3.-Choose two places between aluminum elements to put the stands. The distance to the end will be distributed in
both sides. As more separated were the stands, more stable will be the whole radiator.
4.-
ollowing the sequence of the two images, put one of the bridles and screw them on, to one of the stands with
F
castors, with the four screws included in the package. Repeat this with the rest of the bridles and stands.
In order to continually improve the quality of our company's products, Elnur S.A. reserves the right to make technical changes without prior
warning. Thermal Radiators are planned to be fixed on the walls. If you want to use them in a portable way using this set of castors, is very
important to be sure that stability conditions specified in the current rules are fulfilled. Specially, the rules referred to turnover possibilities. ELNUR
s.a, refuses all responsibilities for failure to comply these conditions.
Ref. 90300200
ELNUR s.a.
c/ Villa Esther, 11
28110 ALGETE (Madrid)
www.elnur.es
+34 91 628 14 40
30200075 R3
Publicidad
