Installation And Start-Up; Contrast Adjustment - Promax RP-200 Manual Del Usario

USER'S MANUAL RP-200

3.2 Installation and start-up.

The RP-200 has been designed for use as handheld equipment.
To switch on the instrument, press the selector [1]. You will see a screen like the
one described in section '4.2 On-screen display'.
To switch off the instrument, press the rotary selector [1] until the RP-200 turns off.
A fully charged battery can power the equipment for more than one-half hour. When
the low battery indicator appears (
When a fully discharged battery is installed, it is possible that, due to residual
charges, the RP-200 may start up. In this case, the instrument will automatically
disconnect before the low battery indicator (

3.2.1 Contrast adjustment

The control of LCD display contrast is carried out by means of the rotary control [5]
located on the lateral panel (see figure 2).
08/2006
) on the display, the battery must be recharged.
) appears on the display.
Page 9