Publicidad
Idiomas disponibles
Idiomas disponibles
HARDWARE NEEDED
31
1/4-20 X 3 1/4 Carriage Bolt
(Qty. 4)
3. Attach Wood Bottom Board (#15) to Caster Beam
Assemblies (#8) as shown in Figure 3. Turn Caster Beams
as shown and attach board with four Carriage Bolts (#31)
and four Wing Nuts (#32). Tighten Wing Nuts securely.
NOTE: Make sure logos are right side up and
facing the outside as shown.
Caster
with
8
Lock
32
1/4-20 Wing Nut
(Qty. 4)
31
15
32
READ AND FOLLOW ALL ASSEMBLY, OPERATING, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO (2)
ADULTS ARE NEEDED TO PUT THIS TABLE TOGETHER!
Note: Support Plate (#43)
is on the inside of Caster
Rail (#8) as shown.
43
Figure
3
6
CAUTION:
31
8
32
Caster
with
Lock
Publicidad
