Publicidad
19. Attach the HDMI cable, included with the Wireless A/V system, to A/V
System RX and TV HDMI input port.
Tech Tip: Make note of the HDMI input port for later use.
20. Connect Power to the Wireless A/V system RX by connecting the USB
Micro-B end of the USB power cable that is provided to the power port of the
receiver unit. Connect the USB-A by using either a USB AC adapter to an
available wall outlet, or an available USB port on the display.
21. Apply power to Display.
a.
Remember to change Display input to proper HDMI input port.
22. Allow a couple of minutes for the A/V System TX and RX to pair. System will
then be ready for use.
Notes
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
Publicidad
