Resetting With A Replacement Control; Technical Data - SOMFY Lighting Slim Receiver RTS Manual De Instrucciones

Lighting Slim Receiver RTS Lighting Slim Receiver RTS

7.3 Resetting with a replacement control

Caution: This reset is carried out if all the RTS control
points have been lost or broken.
Caution! Only switch off the power to the Lighting Slim
Receiver RTS to be reset!
Caution! Do not use an Inis RT/Inis RTS control point
for resetting
1) Cut the power supply for 2 seconds.
2) Switch the power supply back on for approximately
10 seconds (for at least 5 seconds but no longer
than 15 seconds).
3) Cut the power supply for 2 seconds.
4) Switch the power supply back on: the light À ickers
slightly.
5) Quickly press the PROG button on the RTS control
point: the light will come on then go out to indicate
that the RTS control point has been programmed
into the Lighting Slim Receiver RTS.

8. Technical data

Frequency
Power supply
Index protection rating
Operating temperature
Class
Number of programmable RTS control points
30 30
Lighting_Slim_receiver_5055439.indb Sec1:30 Lighting_Slim_receiver_5055439.indb Sec1:30
1
OFF
2 sec.
3
OFF
2 sec.
5
PROG.
b
433.42 MHz
230 V / 50 Hz~
IP 54
- 30°C to + 70°C
II
12 maximum
Copyright © 2008 Somfy SAS. All rights reserved.
Installation guide Installation guide
2
ON
10 sec.
4
ON
c
a
16/06/08 10:15:58 16/06/08 10:15:58