Specifications; Maintenance And Troubleshooting Tips - General TOOLSMART TS05 Manual Del Usuario

SPECIFICATIONS

Measurement Range
Distance-To-Spot (D:S) Ratio 12:1
Measurement Accuracy
Measurement Repeatability
Response Time
Emissivity
Laser Class/Power/Wavelength Class 3R/<3mW/665nm
Backlight Auto Dimming
Auto Power Off Trigger
Current Consumption
Operating Temperature
Storage Temperature
(without battery)
Power Source
Dimensions
Weight
MAINTENANCE AND
TROUBLESHOOTING TIPS
After subjecting the IRT to a sudden change in ambient temperature, you must
wait 30 minutes before measurements are within specifications.
The infrared lens on the front of the unit is the TS05's most sensitive
component. To clean the lens, first use compressed air to blow off loose
particles and then brush any remaining debris away with a camel's hair brush.
If necessary, carefully wipe the lens with a cotton swab moistened with water.
8
-40° to 1076°F (-40° to 580°C)
±3°F (2°C) or ±2% of reading (whichever is greater)
for readings above 32°F (0°C); ±5°F (3°C) or ±2% of
reading (whichever is greater) for readings below
32°F (0°C)
1% of reading or 1°
500 msec for 95% response
Fixed at 0.95
To half brightness after 20 seconds of front-panel
activity
Inactivity for 60 seconds
<50mA, max
32° to 104°F (0° to 40°C)
@ <75% relative humidity (RH)
-4° to 140°F (-20° to 60°C)
@<85% RH
One "9V" battery (included)
6.7 x 5.3 x 1.4 in. (170 x 135 x 36mm)
5.6 oz. (158g)