Steren CCTV-955 Manual De Instrucciones página 72

- Main. Choose the type of transfer of the selected channel: primary or secondary (main or
sub, respectively).
- CBR/VBR. Allows you to choose between constant (CBR) or variable (VBR) bit rate.
- Frame Rate. Select the number of frames per second that will record the selected channel.
- Resolution. Change the resolution of the image. You can choose between D1 or CIF.
D1 Resolution - 704 x 480
CIF Resolution - 352 x 240
If you want to set the same settings to one or all channels, use the tab on the bottom and
press 'Copy to'. At the end select "Ok" to save your changes.
• Video: in this menu you can confi gure the channel settings.
- Blind: Each camera can defi ne multiple regions
for privacy protection, i.e. it creates blocked areas
in camera view. To start, select this option and
enter [Area].
- Copy to: where you want to copy the parameters
to other channels, select the tab of this application
and click on the [copy to] button.
30 30
- Channel: Selects the channel to
confi gure.
- Name: Assigns a name to the selected
channel.
- Show Name and Time: Allow you to fi x
the position of these descriptions on the
screen.
- Brightness, Contrast,
Saturation: Use these
confi gure the image quality.
Hue and
controls to