Publicidad
Idiomas disponibles
Idiomas disponibles
Easy-start
The Easy-start feature gently increases the power over the first 14
brushings to help you get used to the brushing with the Philips
Sonicare. The Easy-start feature works in all modes other than
TongueCare mode. This Philips Sonicare model comes with the Easy-
start feature activated.
Activating or deactivating the Easy-start feature
1 Place the handle in the plugged-in charger.
To activate Easy-start:
Press and hold the power on/off for 2 seconds. You hear 2 beeps to
indicate that the Easy-start feature has been activated.
To deactivate Easy-start:
Press and hold the power on/off for 2 seconds. You hear 1 beep to
indicate that the Easy-start feature has been deactivated.
Note: Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces Philips Sonicare effectiveness in
removing plaque.
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly move through the Easy-start ramp-up cycle.
Traveling with the appliance
Charging with travel case (specific types only)
1 Place the handle in the charging travel case.
2 Connect the charging travel case to a UL 60950-1 and IEC 60950-1
Listed computer, laptop, USB hub, USB receptacle, or wall adapter.
3 The wall adapter you use with this product, shall have an output
marked Class 2 or the limited power source (LPS) requirements
and compatible with the electrical ratings marked on the travel
case.
4 The battery indication flashes white until your toothbrush is fully
charged.
Important: The wall adapter must be a safe extra low voltage source,
compatible with the electrical ratings marked on the device.
13
English
Publicidad
