Disposal; Troubleshooting; Technical Specifications; Declaration Of Conformity - Silvercrest SSB 36 A1 Instrucciones De Servicio

*%B58 B6RXQGEDUIP 6HLWH  0LWWZRFK  -XQL    

8. Disposal

This product is subject to the provisions of Eu-
ropean Directive 2012/19/EC. The symbol
showing a wheelie bin crossed through indi-
cates that the product requires separate re-
fuse collection in the European Union. This
applies to the product and all accessories marked with this
symbol. Products identified with this symbol may not be dis-
carded with normal household waste, but have to be taken
to a collection point for recycling electric and electronic de-
vices. This disposal is free of charge. Protect the environ-
ment and dispose of waste properly. Further information
can be obtained from your local disposal service or city/
municipal administration.
Batteries must not be discarded with your
household waste. Spent batteries must be
disposed of properly. Special containers are
available for this purpose in shops selling
batteries and at municipal collection points.
(Rechargeable) batteries marked with the following letters
contain harmful substances such as: Cd (cadmium), Hg|(mer-
cury), Pb|(lead).
Packaging
The packaging is made from recyclable materials. Dispose
of the packaging sorted by materials. When disposing of
the packaging, make sure you comply with the environ-
mental regulations applicable in your country.

9. Troubleshooting

If the soundbar fails to function as required, please try this
checklist first. Perhaps there is only a minor problem, and
you can solve it yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under
any circumstances.
Fault Possible Causes/Action
• Has the device been connected to
No function
the power supply? Is LED|1 lit up?
• Is the Bluetooth function of the audio
No Bluetooth
device active?
connection
• Did you switch off the device?
• Is the volume set too low on the au-
dio device?
• Have you selected the correct con-
No music play-
nection?
back
• When selecting the optical input for
the audio device, has "PCM down-
mix" been set as the output mode?
• If any interference noise occurs, re-
Interference move any mobile telephones, tablets
noise during or other devices with electromagnetic
operation fields from the immediate area of the
Soundbar.

10. Technical specifications

Model: SSB 36|A1
Power rating: 2x 18 W RMS
Soundbar: Input:
18.0 V
Protection class of the
loudspeaker: III
Power unit Input:
Dongguan City Gangqi 100–240 V ~
Electronic Co, Ltd 50/60 Hz, 1.0 A max.
GQ30-180130-AG: Output:
18.0 V
Protection class of the
power unit: II
Bluetooth: v3.0
Range: up to 10 m
Input:
LINE IN 1x 3.5 mm stereo jack socket
AUX IN L/R 2x cinch sockets
OPTICAL IN 1x TOSLINK socket
Output:
SUB OUT 1x cinch socket
Remove control battery: CR2025 3 V
Dimensions (WxDxH): approx. 94 x 9.5 x 7.8 cm
(excluding wall bracket)
Weight: approx. 1.4 kg
Ambient conditions:
use
10 °C to 35 °C
Relative humidity 40 to 85 %
Subject to technical modification.

Declaration of conformity

A complete declaration of conformity can be requested
from HOYER Handel GmbH, see Service Centre.
1.3 A,
, 1.3 A,
only approved for indoor
GB 31