Unpacking The Appliance; Overview Of The Components - Clatronic TVL 3770 Manual De Instrucciones

placed by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Do not immerse the appliance into water for cleaning. Please fol-
low the instructions as stipulated in the chapter "Cleaning".

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all of the packaging material such as foils, filling
material, cable holders and cardboard packaging.
3. Check the scope of delivery.
4. Check the appliance for any transport damage to prevent
a hazard.
NOTE:
There may still be dust or production residues on the
surface of the appliance. We recommend that you quickly
wipe off the housing with a damp cloth.
Scope of Delivery
1× Tower
3× Pre-assembled Philips screws on the bottom of the
tower
2× Half base plates

Overview of the Components

1 Speed levels
a without oscillation
b with oscillation
2 Timer and on / off switch of the appliance
26
TVL3770_IM
Assembly Instructions
The appliance must be completely assembled before initial
operation!
NOTE:
• You will need a Phillips screwdriver of medium size for
the assembly.
• The screws for the assembly are pre-assembled on
the bottom of the tower.
1. Place the tower upside down and hold it down.
2. Unscrew the 3 pre-assembled screws from the bottom of
the tower. Place them within easy reach.
3. Use the first 2 screws to mount the half of the base plate
with the mains cable guide to the tower.
4. Feed the power supply cord through the cable guide at
the edge of the base plate.
5. Insert the other half of the plate into the base plate that is
already mounted to the tower.
6. Secure the base plate to the tower with a screw.
7. Place the ventilator with the assembled base plate onto a
stable, level surface.
Start-Up
Electrical Connection
1. Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
2. Connect the appliance to a duly installed protective
contact socket.
29.10.20