Dune HD TV-101 Guía De Instalación Rápida página 12

Dune HD TV-101 Quick Start Guide
12
Connecting USB Drives
To connect a USB drive, ensure you are on the main screen of the player menu and connect the USB drive to an USB
port of the player. The player will recognize the USB drive, and will show an item corresponding to the USB drive on
the main screen.
When connecting a USB drive requiring signifi cant power (such as USB HDD), use an external power supply for the
USB drive. Power provided by the USB ports of the player may not be enough for correct functioning of the USB drive.
Do not disconnect or switch off the USB drive when some write operation is in progress.
Accessing Network Drives
To connect a network drive using SMB or NFS protocol, ensure you are on the main screen of the player menu, press the
"MENU" RC button, and choose "Create Network Folder", then fi ll the parameters of the network drive as needed. The
player will show an item corresponding to the confi gured network drive on the main screen.
To browse the list of network resources accessible via SMB or UPnP protocols, use "Network Browser" item on the
main screen of the player menu.
NOTE: If some network resources are not shown by the player, you may need to wait some minutes and then retry (or
press the "MENU" RC button and choose "Refresh" command).
Formatting HDD
To format a HDD attached to the player, select the HDD item on the main screen of the player menu, press
the "INFO" RC button and choose "Format Disk" (to format the entire disk) or "Format Partition" (or to
format an already existing disk partition only). The player will format the disk. To format an unformatted HDD, just
press the "ENTER" RC button on the HDD item.
NOTE: To use disks formatted by the player on a Windows PC, you may need to install additional software on the PC,
such as "EXT2FSD" (http://www.ext2fsd.com/).