Troubleshooting; Maintenance; Cleaning; Replacement Parts - MANOSTAT E-SERIES 72-410-014 Manual De Operación

PROBLEM
Power on, motor does not run.
Power on, motor running, pump Tubing inserted incorrectly.
head does not prime tubing.
Power on, motor making noise,
roller does not rotate.
Fluctuation in output.
IMPORTANT: Inspect tubing link (tubing inside the pump head) regularly and replace if deterioration occurs.
WARNING: Remove power from the pump before attempting any maintenance.
The rear motor bearing should be given two drops of #20 non-detergent oil every three months. Do not over-oil. Clean
off any accumulated dust or dirt.

CLEANING

DANGER: Remove power from the pump before any cleaning operation is started.
Keep the pump enclosure clean by using a mild detergent solution. Never immerse nor use excessive fluid when
cleaning the pump.

REPLACEMENT PARTS

Description
Fuse, Model 72-410-014 (0.5A STD, 250V, 3AG)
Fuse, Models 72-415-014, 72-415-049 and 72-415-028 (T0.5A, 250V, 5
Fuse, Model 72-410-028 (0.75A STD, 250V, 3AG)
Fuse, Model 72-410-049 (1.5A STD, 250V, 3AG)
Fuse, Model 72-415-108 (T1.0A, 250V, 5
Fuse, Model 72-410-108 (2.0A SLO-BLO, 250V, 3AG)
Rubber Foot—Large
Knob Nickel Plt 8-32 UNC

TROUBLESHOOTING

POSSIBLE CAUSE
Line cord not connected properly in outlet.
Tubing has incorrect wall thickness.
Fuse has blown.
CAUTION: Replace the fuse only with one
of the same type and rating. The
fuse rating and type are stated
on the rear panel.
Not enough squeeze on tubing.
Tubing is too hard or there is too
much head pressure.
Tubing is too hard or there is too
much head pressure.
Tubing link is worn out.

MAINTENANCE

20 mm)
7
ACTION
Check line cord connection.
Refer to TUBING SIZE
SELECTION chart.
Check fuse on back of the pump.
Make sure inlet and outlet tubing
are inserted and connected
properly.
Check tubing for backflow and
insert a shim, if necessary.
Use MANOSTAT tubing with
3/32 in. wall thickness only.
Use MANOSTAT tubing with
3/32 in. wall thickness only.
Replace tubing link.
Part Number
B-1115-0047
20 mm) B-1115-0062
B-1115-0049
B-1115-0032
B-1115-0056
B-1115-0013
A-1390-0002
B-1083-0064
Qty.
1
1
1
1
1
1
4
2