Hoover HPI44PW Manual De Instrucciones página 5

E`efdgUf[a`e Xad NeW
To start cooking
1. Touch the ON/OFF key.
After power on, the buzzer beeps once, all displays show " – "
or " – – ", indicating that the induction hob has entered the
state of standby mode.
2. Place a suitable pan on the cooking zone that you wish to
use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. Touching the heating zone selection key ,and a indicator
next to the key will flash
4. Select a heat setting by touching the "1" to "9" key.
• If you don't choose a heat setting within 1minute, the
induction hob will automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time during cooking.
When you have finished cooking
1. Touching the heating zone selection key that you wish to
switch off
2. Turn the cooking zone off by touching the "0" key. Make
sure the display shows"0"
3.Turn the whole cooktop off by touching the ON/OFF
Boost function
Actived the boost function
1. Touching the heating zone selection key
2. Touching the boost key "B" ,the zone indicator show "b"
and the power reach Max.
Cancel the Boost function
1. Touching the heating zone selection key that you wish to
cancel the boost function
2. a: Touching the "Boost" key "B", then the cooking zone will
revert to its original setting.
b: Touching one of the "0" to "9" key, then the cooking zone
will revert to the level you select.
• The function can work in all cooking zones
• The cooking zone returns to its original setting after 5 minutes.
• As the boost function of 1st cooking zone is activated ,the 2nd
cooking zone is limited under level 2 automatically. vice versa
• As the boost function of 3rd cooking zone is activated ,the 4th
cooking zone is limited under level 2 automatically. vice versa
Timer Function
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will
not turn any cooking zone off when the set time is up.
• You can set it to turn cooking zones off after the set time is up.
• You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not
selecting any cooking zone.
2. Set the time by touching the " - " or " + " key of the timer
key.
Touch the " - " or " + " key of the timer once to decrease or
increase by 1 minute.
Hold the " - " r " + " key of the timer to decrease or increase by
10 minutes.
3. Touching the " - " and " + " together, the timer is cancelled,
and the"00" will show in the minute display.
4. When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer
indicator will flash for 5 seconds.
4 GB