Kingfisher KI 2600 Serie Guía De Referencia Rápida página 3

• To select stored reading press [-] or [+]
• To clear memory press and hold [Toggle centre] then press
[On/Off]
Over-writing data in 1 memory location
•
Press [Menu] to find [Memory] mode, Press [Memory] to
enter Memory mode. Note current memory location.
•
Select memory location to re-test using [+] or [-], then press
and hold [Memory] until it stops beeping.
•
Press [Meter] to exit Memory mode, press [
results in the selected memory location.
•
Repeat the above memory location selection step to return
to the current empty memory location.
Visible laser option
• Select [On/Off], [SOURCE]
Text ID Tag option
To create a new Text ID Tag
•
Enter Meter menu.
•
Press [Toggle centre], then [F4]. You will see a new ID Tag,
AAAA001, with the 1
•
Press [-] or [+] to select new alphanumeric character, then
press [Toggle centre] to move to the next.
•
Press [F3] to reset the digit fiber index to '001'.
•
To exit with saving, press [Memory].
•
To exit without saving, press [Home].

] to save new
character flashing.
st
To modify an existing Text ID Tag
•
Enter Meter menu.
•
Press [Toggle centre], then [-] or [+] to select a stored ID
Tag.
•
Press [F3], the character to be edited will flash.
•
Press [-] or [+] to select new alphanumeric character, then
press [Toggle centre] to move to the next.
•
Press [F3] to reset the digit fiber index to '001'
•
To exit with saving, press [Memory].
•
To exit without saving, press [Home].
To delete a Text ID Tag
•
Enter Meter menu.
•
Press [Toggle centre], then [-] or [+] to select a stored ID
Tag.
•
Press [F3]. Press [F4].
•
To exit with saving, press [Memory].
•
To exit without saving, press [Home].
To use a stored Text ID Tag
•
Enter Meter menu.
•
Press [Toggle centre]. ID Tag will flash.
•
Press [-] or [+] followed by [Home] to select.