Konica Minolta PULSOX-2 Manual De Instrucciones página 9

English
CONTENTS
1. DESPECTION OF THE ANALYZER / PARTS................................. E1
2. OPERATING METHOD................................................................... E2
3. ERROR MESSAGES...................................................................... E3
4. SAFETY PRECAUTIONS............................................................... E4
1.DESPECTION OF THE ANALYZER / PARTS
Please open and unfold the appendix page with diagrams of the analyzer, at
the end of this instruction manual and follow the different points with the pic-
tures:
A1 Name of parts
1. Battery cover lock:
2. Battery cover:
3. Strap eyelet:
4. Finger holder:
5. Display:
6. Thumb rest
A2 Measurement Values
1. Battery indication:
2. Pulse rate (P.R.)
3. Oxygen saturation value (SpO
4. Pulse level meter
Calculation method for displayed values
Oxygen saturation value (SpO
Pulse rate (P.R.):
Locks the battery cover.
Open or close this cover when replacing the batteries
with new ones.
Attach the strap to this hook.
Holds finger when inserted for measurement.
A light source is located in the upper side, and a sen
sor in the lower side.
Displays measured value, pulse level meter and er-
ror messages.
Place thumb here during measurement.
The battery mark will begin to blink when the battery
power level is low.
)
2
):
2
Value obtained by performing moving averaging for
the last 5 seconds is updated and displayed every
second.
Value obtained by performing moving averaging for
the last 8 pulse rates is updated and displayed every
second.
E1