Operating Your Blender - Kenmore 100.40709310 Manual De Uso Y Cuidado

PREPARING YOUR BLENDER
1. Before assembling your blender, wipe blender base with a warm sudsy cloth,
then wipe clean with a damp cloth. Dry with a soft cloth. Wash blender jar, lid,
collar and blades in warm, sudsy water. Rinse and wipe parts dry.
Fig. 2
CAUTION:
blender motor/base in water or
other liquid.
2. Turn blender jar upside down. Place the
gasket on the blade assembly (Fig.2).
3. Place the blade assembly with the gasket
in the bottom opening of the jar (Fig.3).
4. Twist collar onto jar. Be sure to engage
Fig. 3
threads properly and securely (Fig.4).
Turn assembled jar right side up.
5. Align the corners of the collar with the
four posts on the motor base and lower
securely into place (Fig.5).
Fig. 5
Fig. 4
CAUTION:
Blades are sharp.
Handle carefully
4
Your blender has been designed to work
in a variety of ways to suit your blending
needs. You can easily control its function
NEVER place
by a simple turn of the control dial
(See Fig. 6).
There are seven control switch speed settings:
Ice Crush/Pulse, OFF, Puree, Chop, Mix,
Liquefy, Stir.
The blender has a "Pulse" setting that is a controlled cycle operation. This means it
operates only while the setting is held down. All other speeds are continuous cycle
operation. They operate continuously at whatever speed is selected until the dial is
switched back to OFF. Pulse speed is maximum speed.
TO OPERATE BLENDER
1. Make sure the Control Switch is in the
OFF position and the power cord is
unplugged.
2. Place Blender motor/base on a dry, level,
stable surface.
3. Set jar assembly into place on motor/base,
mL L
making sure motor/base and jar are
securely connected together.
4. Place the food solids and liquids to be blended into the jar and put the lid on the
jar before blending. Be sure the measuring cup is in place in the middle of the lid.
5. Plug power cord into a standard 120-V, 60 Hz AC-only, 3-prong electrical outlet.
Make sure that the Control Dial is in the OFF position when blender is plugged
in (Fig. 7).
OFF
Ice Crush Puree
Pulse
Chop
Mix
Liquefy
Stir
Kenmore

OPERATING YOUR BLENDER

Fig. 6
Ice Crush
Pulse
Kenmore
Fig. 7
Ice Crush
Pulse
Kenmore
5
OFF
Puree
Chop
Mix
Liquefy
Stir
OFF
Puree
Chop
Mix
Liquefy
Stir