Twin-Star International 26MM9313 Manual De Instrucciones Adjunto página 9

12. Decide on the location of the cabinet. Drill one hole
into wall with power drill, Push Anchors (HH) into
wall holes. Using a Phillips screwdriver, turn screws
(JJ) with Connection iron (GG) into Anchors (HH).
We have included one Tipping Restraint (II) for
this unit. You must connect this one to prevent
accidents or injuries. When properly connected,
this Tipping Restraint (II) can provide protection
against unexpected tipping of the Unit due to small
tremors, bumps or climbing. We strongly recom
mend mounting this Tipping Restraint (II) to a wall
stud and your Unit.
Warning: You must connect the Anti-rewind to
help prevent any accidents or damage
to the unit.
Hardware Used
Connection iron
GG
Anchor
HH
Tipping Restraint
II
Screw
JJ
Fig. 12
HH
x 1
x 1
x 1
x 1
8
GG
JJ
II