Recharging - PUPPYOO T10 Home Manual Del Usuario

Recharging

Caution: Please place the machine on the docking station for at least 2.5 hours before you use it the first time in order that it is
fully charged. Once fully charged, all THREE blue LED indicators will be on.
WARNING:
1.Unplug from the outlet when not in use for extended periods.
2.Do not install the docking station at places directly exposed to sunlight. Charge this machine in an area with a
temperature of 5 ℃ to 36 ℃.
3.The machine will cut out and get charged automatically when placed on the docking station.
4.The temperature of main body and adapter will normally increase when the machine is charged.
5.The charging time and run time of the machine will be different if the machine temperature changes.
6.Machine can be used before fully charged, but the run time will be shorter.
7.Do not use with a damaged cord or plug.
8.Use only the original adapter for charging this machine as others may damage this machine.
Docking Station Installation
Peel off the installing
1
postion sticker.
Drill holes through positions suggested on the sticker by
3
eletrical tools such as electric hammer drill or screwdriver.
Insert the anchors
4
in the drill holes.
13
960mm
Attach the sticker to the wall
2
with the bottom of the sticker at
least 960mm (or 37.8inches)
above the floor.
Drill hole depth:
40mm-50mm.
Place the docking station on the
5
positions indicated on the stricker
and drill the docking station on the
wall.