Finishing The Installation - D-Link DFE-690TXD Guia De Instalacion

Finishing the Installation

A. Windows should automatically detect and install the adapter.
B. If prompted to restart (for Microsoft Windows 98/ME only), click "Yes".
C. You can now remove the driver CD from the optical drive of your notebook.
Troubleshooting
1. If I've lost my CD, what can I do?
The CD contains software drivers and manual which can be obtained from D-Link (see
Technical Support below). Windows 2000 or XP in most cases will automatically install the
correct drivers.
Technical Support
Thank you for choosing D-Link products. For further information, support and product manuals
please visit the D-Link website at
2. What do I do if the installed card does not
seem to function properly?
• Check that the card appears under
START>CONTROLPANEL>SYSTEM>HARDWARE
>DEVICE MANAGER>NETWORK ADAPTERS.
• If it does not appear, try removing and reinserting
the adapter into your notebook.
• If it appears with an error "!" or "?", remove or
uninstall the device by right clicking on the device.
Restart the computer, upon restart Windows will
redetect it. If error persists, try removing the card
and uninstalling the driver. Repeat the installation
process.
www.dlink.eu
www.dlink.co.uk
: 08456 12 0003
3