Warning; Equipment Assembly; Start Up - Sagola 6110 Manual De Instrucciones

1. Before putting the unit into operation, it is
advisable to read all the instructions indicated
below carefully.
2. Likewise, accident prevention rules, regulations
and guidelines for work centres and current laws
1. Air inlet to pressure pot.
2. Regulador de presión calderín.
3. Discharge valve.
1. Connect the pressure pot to
the compressor. Turn the
regulator wheels
anticlockwise. Close
product outlet valves (2).
2. Once the equipment has
been assembled, check that
the hose is connected correctly.
- Before operating
the pressure pot,
check that it
completely
depressurised (the
pressure gauge
show 0).

1. WARNING

2. EQUIPMENT ASSEMBLY

3. START UP

(1)
the
2
- 12 -
and restrictions must be taken into account.
3. The unit must be used only by personnel who
have been trained adequately in their handling,
and only for the uses for which it has been
designed.
3
1
- Disconnect the air
hose from the
pressure regulator.
Lift the lid and fill the
pressure pot.
2
1