Data Dump Mode; The Peel-Off - Oki LD620D Guia Del Usuario

5-6 Data Dump Mode

This function can be used to diagnose the communication issues when the printer does not
work correctly.
In this mode, the received data are not analyzed and printed, instead they are dumped in
hex format without processing.
Turn the printer off and on to recover to the Print Standby Mode.
Use Stand-alone Configuration Mode, Sequence Number 5(refer to 5-1) to start Data Dump
Mode

5-7 The Peel-Off

This function is used to automatically separate labels from the liner.
- The peeler is for Label Paper only.
- When the peeler switch is on, labels are not printed if previous printed labels have
been removed from the peeler.
- When the peeler function is not required, turn the peeler switch off. Keeping the
switch on may result in the printer not working correctly.
- When the peeler switch has been changed, the printer should be turned off and
back on.
1) Open the peel-off cover and turn on the peeler switch. (Check if the peeler LED is on.)
Rev. 1.0
LED
- 20 -
LD620D