70mai Dash Cam Lite MiDrive D08 Manual De Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
3. Stick the camera mount to the windshield
Remove the protective cover from the mount and stick the mount's
base to the center of the electrostatic sticker. Make sure your Dash
Cam body is parallel to the ground.
Press the mount to attach it to the electrostatic sticker tightly.
4. Connect USB cable to the cigarette lighter receptacle
Align the cable with the top edge of the windshield and fasten it
along the passenger's side and the glovebox as shown below.
Connect the cable to the power adapter and insert the adapter into
the cigarette lighter receptacle.
Note: The cigarette lighter receptacle might be positioned differently in your car. The
picture is provided for reference only.
Pillar A
4
Note: You can use the cable crowbar in the box to hide the power cord underneath a
rubber sealing strip.
5. Adjust the Dash Cam angle
Turn on the Dash Cam and adjust the camera angle up and down
against the preview screen to ensure that the camera is facing the
front.
Accessory
This device can be used together with 70mai GPS Mount Holder(sold
separately).
After being properly installed and connected with the mount holder,
you can enable ADAS and other functions on the device.
Please scan the QR code below to get the online user guide.
5

Publicidad

Tabla de contenido
loading

Productos relacionados para 70mai Dash Cam Lite MiDrive D08

Tabla de contenido