Publicidad
Idiomas disponibles
Idiomas disponibles
For additional safety information consult:
• Your employer, union and/or trade association.
• Council of the European communities and/or local codes
• ,,Safety requirements for hand-held non-electric Power Tools", available from: European
committee for standardization, Rue de Stassart 36. 1050 BRÜSSEL, BELGIEN.
http://www.cen.eu/cenorm/homepage.htm
Maintenance:
• Damaged or worn out parts should be replaced only by licensed original parts. Get in
contact with your dealer or a authorized service station for support. Using unlicensed
parts male functions could occur followed by possible hurts of health.
• Check the tool regularly to recognize cracks, unusual clearance, mismatch and to check
the rotary parts for proper operation..
• Recognizing a abnormality the unit needs to be provided to a authorized service station
before using it again. Please consider that many accidents are cause by insuffi cient
maintenance.
Tool applications:
• Tire change supporter: Supports user changing tubeless tires by providing temporary
high air pressure.
Safety instructions for Tire Booster
• Do not wear jeweled or loose clothing and avoid long hair.
• Choking can happen if neckwear is not kept away from tool and accessories !
• Avoid direct contact with accessories during and after use. Safety gloves will reduce the
risk of cuts or burns.
• Use only proper accessories retainers (refer to parts list).
• This unit has been developed as tire change supporter and must only used for this
function. Any misuse could occur serious health damage.
Dangers in use:
• Do not lay down the device before all the air is out and the unit is not under pressure.
• Do not keep the running or under pressure while carrying it.
• Maintain a fi rm grip on the power tool and position your body and arm to allow you to
resist kickback forces. The operator can control torque reactions or kickback forces, if
proper precautions are taken
• Never place your hand near the rotating/moving accessory. Accessory may kickback
over your hand.
• Switch off the unit immediately in case of blocking or twist. Disconnect the air supply and
do not switch on again until the problem is solved. Understand the reason why the tool
has been blocked and make sure that this situation will not occur once more by
counteract.
• In case the air tool gives a strong vibration, replace the accessory, probably it's
damaged or worn out..
Explanation of the pictograms:
Always use hearing protection, face and eye-protection, dusk-mask, if necessary a hair-net,
protective gloves and read / understand the instruction manual.
Instruction manual
Publicidad
