General Safety Information; Work Area Safety; Personal Safety; Bk8000 Battery And A/C Power Supply - Snap-On BK8000 Manual De Usuario

General Safety Information

Read and understand all in structions.
Failure to follow all instructions listed
below may result in electric shock,
fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS!

Work Area Safety

• Keep your work area clean and well lit. Cluttered
benches and dark areas may cause accidents.
• Do not operate electrical devices or video scope
tool in explosive at mospheres, such as in the
presence of flammable liquids, gases, or heavy
dust. Electrical devices or visual inspection
tools create sparks which may ignite the dust or
fumes.
• Do not use the video scope around corrosive
chemicals.
• Keep bystanders, children, and visitors away
while operating visual inspection tool. Do not let
visitors contact the unit.

Personal Safety

• Stay alert, watch what you are doing and use
common sense. Do not use video scope while
tired or under the influence of drugs, alcohol,
or med ications. A moment of inattention while
op erating tools may result in serious per sonal
injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
protection must be used for appropriate condi-
tions.
• Use proper accessories. Do not place this prod-
uct on any unstable cart or sur face. The product
may fall causing serious injury to a person or
serious damage to the product.
•Prevent object and liquid entry.
Never spill liquid of any kind on the
video dis play unit. Liquid increases
the risk of elec trical shock and
Digital Wireless Video Scope
• Use safety equipment.
Always wear eye protection
(users and bystandrs). Dust
mask, non-skid
shoes, hard hat, or hearing
Snap-on
damage to the product.
• Do not use this device for personal or medical
use/inspection in any way.
• The unit is not shock-resistant. Do not use it as
a hammer or drop it.
BK8000 Battery/ Power Supply
To reduce the risk of serious injury, read these pre-
cautions carefully before using the battery charger
or battery.
A/C Power Supply
• Do not probe A/C power supply with conduc-
tive objects. Shorting of battery terminals may
cause sparks, burns or electrical shock.
• Do not use A/C power supply if damaged. A
damaged A/C power supply increases the risk
of electrical shock.
• Use an appropriate power source. Do not
attempt to use a step-up transformer or an
engine generator. Doing so may cause damage
to the A/C power supply of the BK8000 resulting
in electrical shock, fire or burns.
• Do not allow anything to cover the A/C power
supply while in use. Proper ventilation is
required for correct operation of the A/C power
supply. Allow a minimum of 4" (10 cm) of clear-
ance around the charger for proper ventilation.
• Unplug the A/C power supply when not in
use. Reduces the risk of injury to children and
untrained persons.
• Unplug the A/C power supply from outlet before
attempting any maintenance or cleaning.
Reduces the risk of electrical shock.
• Do not use A/C power supply in a damp, wet
or explosive environment. Do not expose to
safety
rain, snow or dirt. Contaminants and moisture
increase the risk of electrical shock.
• Do not open the A/C power supply or BK8000
housings. Have repairs performed only at
authorized locations. (see Snap-on Service
Center Location page 19).
• Do not carry the A/C power supply by power
cord. Reduces the risk of electrical shock.
3