Publicidad
Idiomas disponibles
Idiomas disponibles
5. Attach the Legs (B) to the Support Frame
pieces (C) moving to the desired height
position until each leg "clicks" into place.
Ensure that both silver buttons protrude fully
through the adjustment holes and legs are
locked into place at the same height.
6. Attach the Assist Bar (A) to the other side of the Support Frame pieces
(C). Notice the silver clips on the Assist Bar just below the foam padding.
The clips should face outward as these are what the storage pocket hangs
onto. Once the Assist Bar is attached to the Support Frame, use the
Support Brackets (H) to lock the assist bar into place. (Note: the support
clips will need to be removed from the support frame then re-attached in
the desired position.)
Instructions
6
Publicidad
