Mac® Os - Kodak Digital Film Scan Tool Manual Del Usuario

G. The currently selected image will be shown here.
H.
Click this button to flip the current image.
NOTE: You need to press or click the SCAN button (2 or E) before you can use this
function.
I.
Click this button to rotate the current image clockwise.
NOTE: You need to press or click the SCAN button (2 or E) before you can use this
function.
J. Click this button to save the scanned images. If the save path selected (O) is invalid,
a warning will appear.
K. Click this button to close the program.
L. Use the "Brightness" slider to adjust the brightness values between -64 and 64.
N. Use the three "Color Balance" sliders to set the RGB values between -6 and 6..
M. Click this button to reset the color/brightness adjustments to their default levels.
O. Click this button to select a folder to use as a save location for the scanned images.
P.
This box will display the file path where the scanned images will be saved.
Q. This window displays scanned images which have not been saved yet. The currently
selected image will be highlighted with a green border and will be displayed in the
window (G).
NOTE: The software can only hold 13 images at a time. Once you have 13 images
you need to save the images (J) to your computer or else they will be deleted.
R. This window will display a live view of the inserted negative/slide.
10
USING THE SOFTWARE TO DIGITIZE NEGATIVES/SLIDES (MAC® OS)
Start the "Image Scan" program by double-clicking on the corresponding icon. The program
should open in its own window on your screen. Use the diagram and table below to
understand the software and its functions.
A.
Select the type of film being scanned: negative, slide, or color/black & white.
B. Select the format in which you want to save the images: JPG or TIFF.
C.
Select the resolution for the image: standard (2592 x 1680 pixels) or interpolated
(5184 x 3360 pixels)
D.
Click here to visit the Kodak website to register your product. (Link will open in a
separate window).
E. Click here or press the SCAN button 2 directly to scan an image.
NOTE: Until you click here or press the SCAN button 2, you can adjust the color,
but cannot flip or rotate the image. Once the image is scanned, it is still not saved to
your computer. You need to click the save button (J) to permanently save the image.
F.
Click this button to delete the currently selected image.
G. The currently selected image will be shown here.
H.
Click this button to flip the current image.
NOTE: You need to press or click the SCAN button (2 or E) before you can use this
function.
I.
Click this button to rotate the current image clockwise.
NOTE: You need to press or click the SCAN button (2 or E) before you can use this
function.
J.
Click this button to save the scanned images. If the save path selected (O) is invalid,
a warning will appear.
11