preparation for use
opening the chassis
fig 1
fig
click!
fig
click!
4
my3 & my4 chassis languages D0.14-5 4-5
Remove all packaging materials lay chassis
on floor as shown.
Unfasten the folding latch on the side of
the chassis.
Lift the handle in the middle of the chassis to
open. There will be a positive 'click' when the
lock is engaged.
Push the grey button on the left of the
pushchair and lift the handlebar upwards.
There will be a positive 'click' when it
is engaged.
preparation for use
fitting the front wheels
fig 4
click!
A
fig 5
click!
A
fitting the rear wheels
fig 6
B
my4 only.
Attach the front wheels as shown.
Push until they click securely into place.
Pull to make sure they are fully located.
To release, press button A and remove.
my only.
Attach the front wheel as shown.
Push until they click securely into place.
Pull to make sure they are fully located.
To release, press button A and remove.
Attach the rear wheels as shown.
Push until they click securely into place.
Pull to make sure they are fully located.
To release press button B and remove.
5
26/9/08 17:58:57